1. Make sure you have at least 400mm above the door opening to allow for the roll.

2. The roller door must be a minimum of 50mm wider than the opening (25mm each side). The roller door can be wider if there is sufficient room. The door tracks will take up 75mm to 100mm each side. Jambs can be fitted to hold the door tracks.

3. The walk through opening when the door is up will be reduced by 80mm to allow for the handle.

4. The door can be lowered if a height restriction applies, but note the walk through headroom will also be correspondingly lower.

5. Please note that extra space of 200mm must be allowed between the curtain edge and fixing brackets if an electric motor is to be fitted.

Maintenance:
Washing the roller door should occur more frequently in coastal areas or where high levels of industrial pollution occur.