| |
© 2002 - 2012
Absoe Pty Ltd
All Rights Reserved:
Disclaimer
|
|
|
- 900 mm or 1200 mm Bays
- Standard Finish: Black, White, Chrome & Raw
Double Sided Bay
|
Single Sided Bay |
T Leg Single or Double Sided
|
H Leg Single or Double Sided |
| |
 |
MK 5 Outrigger Gondola System |
- 2150 mm to 3200 mm High
- 900 mm, 1200 mm, 1800 mm, & 2400 mm Bay Widths
BDS - Outrigger Double Sided H Leg (high base) |
Go back to the top
| |
 |
Supershelf |
| |
Assembly of Kingfisher Supershelf Starter bay & Add on bay |
| |
Kingfisher - Spine Work and Infill |
A bay of Shelving |
| |
 |
- Post and Joiner (unshaded)
1-Post (s)
2-Joiner
3-Base Shelf
- Infill (shared)
4-Panel channel
5-Infill panels
|
| |
Kingfisher - Spine Work Parts |
| |
|
Post
Double sided - used for centre gondolas.
Single sided - used for wall display.
Height sizes with a 450mm base
1400mm 1800mm
1530mm 2100mm |
| |
|
Base Extender
Used Extend a 450mm base to accommodate either a 525 or 600mm base shelf. |
| |
 |
Joiner
915mm
1200mm |
| |
Assembly Instructions:
Place in post leg after removing post cap.
Shelf Holding lugs go to the front of the bay |
Spine work also includes a "base" shelf. |
| |
Kingfisher - Standard and Narrow Infill Systems |
| |
|
Assembly instructions:
- Super shelf post:
Single Sided.
Double Sided.
- Joiner
End lugs slot into top holes at side of post
- Base Shelf Extender
Use only for 525mm and 600mm deep base shelves. Remove post cap to insert extender.
- Base Shelf
450mm, 525mm, 600mm.
Slot into metal U-channel on post leg.
- Planel channel
Slot into remaining holes in side of post
- Infill panel
Beaded or unbeaded pegboard, perforated or plain metal panels slide into panel channel.
Gondolas require panels to both sides of the post.
- Post caps
Tap into of post and base.
- Top capping
915mm and 1200mm
Fit to top of infill panels.
- F section
Used to stiffen pegboard in narrow infill system only.
- Bottom tie bar
Used to stiffen pegboard in narrowinfill system only.
- H section
Used to align adjoining pegboard panels in narrow infill system only.
|
| |
 |
Brackets for Shelving and Baskets
Combination flst and one angle downward. Angle is 17°
Sizes:
225mm Flat only
300mm
375mm
450mm
525mm Flat only
600mm Flat only
|
| |
 |
Shleves
Depths 225, 300, 375, 450, 525, and 600mm.
Widths 915 and 1200mm.
Available with Ticket Strip upon Request. |
| |
Kingfisher - Wire Baskets |
|
| |
|
Dump Baskets
300 X 915 or 1200mm
375 X 915 or 1200mm
450 X 915 or 1200mm
525 X 915 or 1200mm
Dump Basket Dividers (not shown)
300, 375, 450 and 525mm |
| |
|
Basket Brackets Flat
300/375mm
450/525mm |
| |
|
Angled Basket Brackets
300/375mm
450mm
525mm |
Go back to the top
| |
 |
Shelving Systems |
|
Metro - Post T 1595 mm x 470 mm High Profile |
Go back to the top
| |
URI System 70
Single Sided 1880 mm High |
|
Components to Assemble 914 mm Module Unit
1 = |
(4) |
Perforated Back Panel - 902 mm x 410 mm wide |
or |
(4) |
Plain Panel - 902 mm x 410 mm wide |
2 = |
(2) |
Single Sided Post - 1845 mm x 465 mm wide |
| 3 = |
(1) |
Base Shelf - 914 mm x 470 mm wide |
Available:
Standard Height - 1470 mm, 1880 mm and 2290 mm.
Standard Width - 914 mm and 1200 mm. |
| |
URI - Double Sided 1470 mm High |
|
Components to Assemble 914 mm Module Unit
1 = |
(1) |
Top Cap - 886 mm |
2 = |
(6) |
Perforated back Panel - 902 mm x 410 mm |
or |
(6) |
Plain Back Panel - 902 mm x 410 mm |
| 3 = |
(2) |
Double Sided Post - 1435 mm x 465 mm |
| 4 = |
(2) |
Base Shelf - 914 mm x 470 mm |
Available:
Standard Height - 1470 mm, 1880 mm and 2290 mm.
Standard Width - 914 mm and 1200 mm.
|
| |
Assembly Overview
URI - Supermarket Gondola - System 70 |
Go back to the top
|
